LED Solar Stree tlight

Description

LED Street Light Solar Series state of the art design with low light decay, high color rendering index Bridgelux  LED chips and high quality low weight aluminum alloy housing. Its innovative fashion design a perfect solution for multiple street & garden lighting applications with minimum relamping cost.

• No mercury and lead. No UV. No infrared. No radiation. Without causing any flickering, helpful to protect the eyes.
• PIR sensor: 100% power if people comes, 30% power if without people.
• Always consult a qualified, licensed electrician prior to the installation of this product.
• Always ensure that all components are joined properly before they are installed.
• It is recommended that adequate airflow and heat sink be taken into account in the application and installation of this product. Improper thermal management may lead to premature failure.
• If any doubt about the installation or use of this product, consult a competent electrician.
• Exceeding the operating temperature values may damage LED chips by reducing the total lamp life and lumen output, and inversely impact color consistency.
• Switch off power of the mains supply or respectively of the connection lead before doing any works.
• Avoid voltage drops by using a dedicated line for each maximum power consumption line.
• The manufacturer rates each power supply for maximum power output at optimum thermal and voltage conditions. As with any power supply, true actual maximum continuous current output depends upon various environmental factors such as ambient temperature, line voltage fluctuations, and orientation that may affect heat dissipation. For optimum performance, make sure the load is between 50% and 80% of the total capacity of the power supply.
• LED products are continuously being improved upon in ever-shortening manufacturing cycles. LED color temperature (kelvin), lumen output, and product appearance can change from order to order. Please note that variation in color temperature (kelvin) is commonly +/- 250k and brightness (lumens) is +/- 10%.

          Precaution: Switch off power before doing any works.

• Step 1: choose a good place for daylight and arrange poles. Recommend 6-8M height, diameter is 30-100MM, thickness more than 2.00mm, Iron or stainless steel poles

• Step 2: check the accessories are complete as below: MB socket head cap screw, MB socket head cap screw and tools.

• Step 3: turn off switch before installation

• Step 4: Fix the all in one solar led street lights and the poles, tighten the screws with specialized tools and make sure the installation firm

• Product name : TS-SL 51 ( 40W-CW / NW / WW )
• Colour : Cool white / Nature white / Warm white 
• Colour temprature : 6000K / 4000K / 3000K
• Luminous : 4400 / 4200 / 4000
• CRI (Ra ): 70 / 70 / 70 
• Beam angle : 120° / 120° / 120°
• Outer Carton Size(L×W×H) : 1190×510×220mm
• GW : 21Kg
• NW : 19Kg